A new AC system can underperform its own rated efficiency if the line set, refrigerant match, and load calculation aren't handled correctly during install. Every Ac Installation quote includes a proper cooling load assessment before equipment is even selected.
New AC installations fail to hit their rated efficiency more often than people realize, usually because of an oversized unit, an undersized line set, or ductwork that can't move the air the new equipment needs. We size the equipment to the actual cooling load and match line sets to manufacturer spec, not the shortest route between units.
The details other installers skip.
Tonnage recommendations come from an actual cooling load calculation, not a rule-of-thumb estimate.
A range of SEER2-rated options lets you balance install cost against monthly energy savings.
Labor is warrantied separately from the manufacturer's parts warranty, so you're covered on both fronts, protecting the installation itself.
Line sets are sized and run according to manufacturer specification, not the shortest physical distance between units, since an undersized or overly long run quietly kills efficiency.
What a full installation project covers.
The assessment covers insulation, window exposure, and orientation so the equipment matches actual cooling demand, not a generic estimate.
We walk through SEER2 ratings and efficiency tiers so you can weigh upfront cost against monthly energy savings so the decision is based on real numbers, not marketing language.
We size and insulate line sets to manufacturer spec, avoiding the efficiency losses that come from undersized or poorly routed runs.
Placement matters for airflow and noise, so units are set away from heat-trapping walls and debris rather than wherever's most convenient to run lines.
After installation, we verify refrigerant charge, airflow, and temperature split before considering the job complete, not just assumed correct because the unit powers on.
We handle removal and proper disposal of the old system, including refrigerant recovery per EPA regulation, with refrigerant recovered according to EPA requirements.
Four steps from assessment to cold air.
We book an in-person visit, since accurate sizing requires seeing the property.
A tech shows up with the assessment equipment and evaluates the home directly.
The quote includes several efficiency tiers to choose from, based on your actual load numbers.
Installation is completed and commissioned with performance verification, backed by a written labor warranty with a written warranty on labor.
Feedback from completed AC installation projects.
Went with the mid-tier SEER2 unit after they walked through the numbers on payback period, no pressure to buy the most expensive option.
— U. Falkenrath, homeowner
Their installers placed the condenser away from our patio so it's barely noticeable, previous installer had it right against the wall we sit next to.
— R. Okonkwo, homeowner
New AC install and they actually tested the charge and airflow before calling it done, not just flipping it on and leaving.
— X. Provenzano, homeowner
Old unit removed properly and disposed of, didn't have to deal with a leftover condenser sitting in the yard for weeks.
— J. Ferreira, homeowner
What people ask before installing.
An accurate size comes from a cooling load calculation done in-home, not a general rule based on square footage alone correctly for your specific home.
Whether it pays off depends on your climate and how long you'll own the home, which we run through together at quote time.
A typical install wraps up in one day, longer if line set routing or electrical work is more involved.
We remove it and handle disposal, including proper refrigerant recovery required by EPA regulation, with refrigerant recovered to code.
Both ducted and ductless mini-split options are available, chosen based on what actually suits the home.
Workmanship is covered for a set period, in addition to the manufacturer's equipment warranty.
Installation service covers Raywick and the surrounding Raywick, KY zip codes listed below — call to schedule an assessment.
Call +1-844-611-2875
